Vogel Series CAB
Self-priming block centrifugal pump Self-priming block centrifugal pumps with built-in ejector for pumping pure to slightly contaminated water, which allows pumping even if contained in the water dissolved gases. 230 V with 3 m cable and plug. Technical data Flow rate: up to 6 m³ / h Head: up to 61 m Power supply: one- and three-phase.
Vogel Series LM, LMN
Block pump Single-stage volute casing pumps in block design with directly mounted IEC standard motor. Housing connection dimensions according to EN 733 or according to the earlier DIN 24255 and therefore exchangeable. Closed, optimized, laser-welded impeller in 1.4404 for sizes 32-125 to 65-125. Sizes 65-160 to 150-400 Standard gray cast iron, optional bronze.
Vogel Series CMA, CA, CFB, CF-Automat
Automatic water heaters with pumps for dry installation Horizontal multi-stage centrifugal centrifugal pumps in block design with common continuous pump motor shaft. Available with diaphragm pressure vessel or air chamber including accessories. Technical data Capacity: up to 14.40 m³ / h Head: up to 73 m Power supply: Single and three-phase 50 Hz Power: from
Vogel Series LMH
Hydrovar single stage centrifugal pump Single stage volute casing pumps with closed radial impeller. Block version for horizontal installation. Shaft seal, uncooled mechanical seal according to DIN 24960. Pump shaft rigidly coupled with motor shaft. Pump housing open on the drive side, so that the drive unit can be removed without disassembly of the pump housing. Technical specifications